MTS TW Elite - Manual (Page 91)

4. In the Properties panel, enter the following:
Go To + DAQ + Detection Activity Properties
Value Property
Enter “Apply Program Command” Display Name
Note:
The controls that follow
are in the Go To tab.
Right-click Rate and select Edit to display
the Edit Variable window. In the Edit Rate
Variable window, change the Default
Value to 3 mm/s.
Enable (check) Termination Condition
1.00 kN Value
Enable (check) Brake Distance
100 N Value
Runtime effect
Modified properties are configured to ramp the crosshead at a rate of 3 mm/s until either:
MTS TestSuite | 91
Modify the Example Test