Adding an input variables activity – MTS TW Elite User Manual
Page 86
Advertising
5. Observe that the variables used for calculating a rectangular area (Width and Thickness) are
automatically removed from the Variables panel, and the variable for Diameter is automatically added
to the Variables panel.
Adding an Input Variables Activity
Overview
This task adds an Input Parameters activity to the workflow and defines its properties.
Procedure
1. Select Define>Procedure. In the Toolbox Panel, scroll to the Operator Entry category.
2. Drag the Input Variables activity to the work area, and place it in the Set Up section.
86 | MTS TestSuite
Modify the Example Test
Advertising