3 port configuration, Port configuration, Page 30 – Omnitron Systems Technology Converter GXTM User Manual User Manual
Page 30
4.3
PORT CONFIGURATION
The Port configuration screen provides access to the port level configuration parameters, such as, Port
Access, SFP information, 802.3ah, Port VLANs, Tagged VLANs and cNode Loopback. To access the Port
configuration screen, select C from the Module configuration screen and press <ENTER>. The Port
configuration screen will appear.
PI
Module - iConverter GX/TM iConverter, Serial Agent
Identifier -
Chassis Number
= 1
Port VLAN Path Setup
Slot Number
= 2 ----------------------------------
Model Number
= 8923-1
11: Fiber to UTP
Enable
On
12: Fiber to BP A
Enable
On
Port Access Control Setup
13: Fiber to BP B
Enable
On
----------------------------------
14: UTP to BP A
Enable
On
1: Fiber Enable
On
15: UTP to BP B
Enable
On
2: UTP Enable
On
16: BP A to BP B
Enable
On
17: Fiber to Mngmnt
Enable
On
Enhanced Features
18: UTP to Mngmnt
Enable
On
----------------------------------
19: BP A to Mngmnt
Enable
On
3: 802.1Q Processing Enable
Off
20: BP B to Mngmnt
Enable
On
4: Configure Tag VLAN Control
5: Configure VLAN Membership
6: Save TAG VLAN parameters
7: Configure 802.3ah parameters
8: Configure 802.3ah events
9: SFP Status
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
SA
Module - iConverter GX/TM iConverter, Serial Agent
Identifier -
Chassis Number
= 1
Port VLAN Path Setup
Slot Number
= 2 ----------------------------------
Model Number
= 8923-1
11: Port1 to Port2
Enable
On
12: Port1 to Mngmnt Enable
On
Port Access Control Setup
13: Port2 to Mngmnt Enable
On
----------------------------------
1: Fiber Enable
On
2: UTP Enable
On
Enhanced Features
----------------------------------
3: 802.1Q Processing Enable
Off
4: Configure Tag VLAN Control
5: Configure VLAN Membership
6: Save TAG VLAN parameters
7: Configure 802.3ah parameters
8: Configure 802.3ah events
9: SFP Status
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 30