Omnitron Systems Technology iConverter 1 Module Redundant Power Chassis - Manual (Page 11)

3.2 LED Indicators
The following table details the LED status indicators:
LED Function Color Legend Off State On / Blinking state
1
Power
Supply 1
LED
Green PWR1
No power applied to
power source 1
Solid: Power applied to power source 1
0.5 Hz Blinking: Power applied to source 1
and contact closure is in the alarm state
2
Port A
Link/Activity
Green Lnk/Act No link on Port A
On: UTP A linked at 10 Mbps or 100 Mbps
10 Hz Blinking: Rx and Tx 10 or 100 Mbps
data activity on Port A
3
Port A
Speed
Green 10/100
If Port A link is
active, the port is
linked at 10 Mbps
On: UTP Port linked at 100 Mbps
4
Power
Supply 2
LED
Green PWR2
No power applied to
power source 2
Solid: Power applied to power source 2
0.5 Hz Blinking: Power applied to source 2
and contact closure is in the alarm state
5
Port B
Link/Activity
Green Lnk/Act No link on Port B
On: UTP B linked at 10 Mbps or 100 Mbps
10 Hz Blinking: Rx and Tx 10 or 100 Mbps
data activity on Port B
6
Port B
Speed
Green 10/100
If Port B link is
active, the port is
linked at 10 Mbps
On: UTP Port B linked at 100 Mbps
Table 3: LED Definitions
Page 11