Omnitron Systems Technology iConverter 1 Module Redundant Power Chassis - Manual (Page 3)

1.0 INTRODUCTION
1.1 General Description
The iConverter 1-Module chassis features a number of redundant power inputs,
UTP port and alarm options. It supports primary and secondary power input
options and variety of power connection types. By utilizing the optional UTP
ports, the unit can be powered from a connected Power Sourcing Equipment
(PSE). Optional contact closure sensors are provided for connection to external
alarm indicators. By installing a managed
iConverter module into the chassis,
the chassis functions can be remotely managed by Telnet and SNMP software
such as Omnitron’s
NetOutlook ® Management software.*
1.2 About This Manual
This document supports release 1.1 of the iConverter 1-Module Redundant
chassis.
* iConverter management module and NetOutlook must be at version 3.3c or
higher.
Page 3