Omnitron Systems Technology iConverter 1 Module Redundant Power Chassis User Manual
Page 16
Power the chassis containing the Management Module and press <ENTER>
to bring up a command line prompt on the attached PC.
The Management Options screen will be displayed.
Management Options iConverter, Serial Agent
Network Management
1: Chassis and Module Management
2: Set Module Identifier
Management Module Preferences
3: IP and Control Preferences
4: SNMP Preferences
5: Abandon Preference Changes
6: Save Preference Changes
7: Restore to Factory Defaults
8: Restart Management Module
9: Other Networking Features
Management Module Maintenance
10: Firmware Update
11: Set Date/Time
IP Address = 192.168.1.220
Chassis Number = 1
Enter Choice, (H)elp, E(x)it >
Figure 7: Management Option Screen
A new Management Module does not have a password, and will skip the
Password Entry screen and go straight to the Management Options screen.
Page 16