Omnitron Systems Technology iConverter 1 Module Redundant Power Chassis User Manual
Page 20
Advertising
For models with UTP ports, the Control Screen is available to enable or disable
Port A and Port B. To select the Control Screen, enter C.
Module Screen - iConverter 1-Module Redundant
Identifier -
Chassis Number
=
7
Slot Number
=
2
Model Number
=
8248-512
Port Access Control Setup
-------------------------
1: Port A Enable
On
2: Port B Enable
On
Port VLAN Path Setup
--------------------
3: Port A to Backplane A
On
4: Port A to Backplane B
Off
5: Port B to Backplane A
Off
6: Port B to Backplane B
On
7: Port A to Port B
Off
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Figure 12: Control Screen
Page 20
Advertising