MacDon M155 Operators Manual - Manual (Page 147)

OPERATION
15. Attach slow speed transport hitch to the weight box
tongue with drawbar pin. Secure using lynch pin (A).
Attach safety chain (B).
16. Connect hitch harness (C) to electrical socket at front
of weight box.
Figure 4.55: Weight Box
17. Remove the temporary lift pins (A) (should be loose in
lift arm) and place into storage holes on weight box.
Figure 4.56: Lift Arms
Converting from Transport Mode to Field Operation
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine and remove key from ignition.
2. Disconnect electrical harness at connector (B) from
windrower and store harness (A) on weight box.
Figure 4.57: Electrical Harness
169883
131
Revision A