MacDon M155 Operators Manual - Manual (Page 79)

OPERATOR’S STATION
3.15 Engine Controls and Gauges
All engine controls and gauges are conveniently located on
the operator’s console.
Refer to the illustration for the location and the following for
a description of each.
A – Ignition Switch
• ACC: Fully counterclockwise
• OFF: All electrical systems OFF
• RUN: Clockwise
• START: Fully clockwise to crank engine. Release and
switch returns to RUN
• REMOVE KEY WHEN WINDROWER NOT IN USE.
KEY ALSO LOCKS DOORS
B – Engine Temperature Gauge indicates engine coolant
temperature.
• Normal Running: 180°–225°F (82°–107°C)
• Warning Tone Over 230°F (110°C)
C – Fuel Gauge indicates fuel level in tank.
• E: Empty
• F: Full
D – Throttle controls engine speed.
• FULL: Push lever forward
• OPERATING: Refer to 4.3.6 Windrower Operation, page
111
• CLOSED: Pull lever back
Figure 3.46: Engine Controls and Gauges
A - Ignition Switch B - Engine Temperature Gauge
C - Fuel Gauge D - Throttle
169883
63
Revision A