MacDon M155 Operators Manual - Manual (Page 355)

MAINTENANCE AND SERVICING
7. Replace rubber insulator boot (A).
8. Push connector onto light bulb.
Figure 5.148: Headlight Assembly
9. Position headlight into light receptacle, ensuring top is
up, and secure with screws (A).
NOTE: Aligning of light should not be necessary.
Figure 5.149: Headlight Assembly
Field Lights: Cab-Forward
Adjusting Field Lights
The field lights are best adjusted with the machine in the field (or equivalent) to suit Operator preference.
DANGER
Stop engine and remove key from ignition before
leaving operator's seat for any reason. A child or
even a pet could engage an idling machine.
1. Hold onto handholds (A) on the cab front corners, and
stand on header anti-slip strips.
Figure 5.150: Field Lights
169883
339
Revision A