18cab display module (cdm), 1engine and windrower functions, Cab display module (cdm) – MacDon M155 Operators Manual User Manual
Page 88: Engine and windrower functions, 18 cab display module (cdm), 1 engine and windrower functions
Advertising
3.18
Cab Display Module (CDM)
3.18.1
Engine and Windrower Functions
Figure 3.61: CDM Engine and Windrower Functions
A
– Engine rpm
B
– Ground Speed: mph or kph
C
– DISPLAY: Engine/windrower functions.
D
– HAZARD WARNING LIGHTS switch: Activates hazard warning lights, cancels turn signal.
E
– SELECT switch: Allows operator to select display item on lower line. Push to SELECT.
F
– TURN SIGNAL switches: Activates turn signals on windrower and header Push-ON / Push-OFF.
G
– IGNITION switch positions: Accessory / Stop / Run / Start.
H
– Engine warning lights: Engine Pre-Heat / Water In Fuel / CAUTION / Stop Engine.
169883
72
Revision A
Advertising