MacDon M155 Operators Manual - Manual (Page 364)

MAINTENANCE AND SERVICING
2. In the grill of the hood, remove two screws (A) from
light (B), and remove light.
3. Remove connector from light.
4. Connect wiring harness to new light (B) and install light
with screws (A).
Figure 5.169: Red Tail Lights
Beacons (if installed)
Warning beacons are available as an optional Dealer-installed attachment (MD #B5582).
1. Shut down engine and remove key. Turn beacons OFF.
NOTE: Hold onto the handholds (B) on the cab front
corners, and stand on the header anti-slip strips,
or stand on the maintenance platform when
accessing the beacons (A).
Figure 5.170: Warning Beacons
2. Turn lens (A) counterclockwise to unlock lens from
base and remove lens.
Figure 5.171: Warning Beacons
169883
348
Revision A