Air intake system, Caution – MacDon M155 Operators Manual User Manual
Page 312
3. Remove filler cap (A) by turning it counterclockwise.
4. Carefully pour the oil. A funnel is recommended to
avoid spillage. Refer to
Lubricants, Fluids, and System
for oil specifications.
CAUTION
Do NOT fill above the HIGH mark.
5. Replace oil filler cap (A) and turn it clockwise until snug.
6. Check the oil level. Refer to
7. Close the hood. Refer to
Figure 5.66: Oil Filler Cap
Air Intake System
IMPORTANT:
Do NOT run engine with air cleaner disconnected or disassembled.
Engine intake air is drawn through a duct (A) from the
cooling box that precleans the air and then through a dual
element filter (B).
The
air
cleaner
canister
is
equipped
with
an
aspirator (C) that removes dust continuously from the air
cleaner housing.
Figure 5.67: Air Intake System
169883
296
Revision A