MacDon D60 Draper Headers - Manual (Page 141)

SECTION 8. MAINTENANCE AND SERVICING
Form 169441 139 Revision B
8.11 MAINTENANCE SCHEDULE
The following maintenance schedule is a listing of
periodic maintenance procedures, organized by
service intervals. Regular maintenance is the
best insurance against early wear and untimely
breakdowns. Following this schedule will
increase machine life.
For detailed instructions, refer to the specific
headings in Section 8 MAINTENANCE AND
SERVICING. Use the fluids and lubricants
specified in Section 8.3.4 Recommended Fluids
and Lubricants.
Service Intervals: The recommended service
intervals are in hours of operation. Where a
service interval is given in more than one time
frame, e.g. "100 hours or Annually", service the
machine at whichever interval is reached first.
IMPORTANT
Recommended intervals are for
average conditions. Service the
machine more often if operated under
adverse conditions (severe dust, extra
heavy loads, etc.).
CAUTION
Carefully follow safety messages given under
Section 8.1 PREPARATION FOR SERVICING,
and Section 8.2 RECOMMENDED SAFETY
PROCEDURES.
8.11.1 BREAK-IN INSPECTIONS
BREAK-IN INSPECTIONS
HOURS ITEM CHECK
5
Hardware Torque. Refer to Section 8.3.1 Recommended Torques.
Sickle Drive Belts.
Tension. Refer to Section Refer to Section 8.7.8 Sickle Drive
Belts - Non-Timed Drive and 8.7.9 Sickle Drive Belts - Timed
Drive.
Periodically check for first 50 hours.
10
Wobble Box Mounting Bolts Torque. Refer to Section 8.7.10.1 Mounting Bolts.
50
Wobble Box Lubricant. Change. Refer to 8.7.10.6 Changing Oil.