MacDon D60 Draper Headers - Manual (Page 72)

SECTION 7. OPERATION
Form 169441 70 Revision B
7.21.4.2 Right Side Wheels To Transport
a. At wheels at the right end of header, remove
hairpin (A) from latch.
b. Lift latch (B), disengage right axle, and lower to
ground.
CAUTION
Stand clear of wheels and release linkage
carefully as wheels will drop once the
mechanism is released.
c. Carefully pull handle (C) to release the spring,
and let the wheel drop to the ground.
d. Lift wheel and linkage with handle (D), and
position linkage in second slot from bottom.
e. Lower handle (C) to lock.
f. Remove pin (E), and install at (F) to secure
linkage. Turn pin (E) to lock.
g. To position the left wheel (G), pull pin (H), swivel
wheel counter clockwise, and re-lock with pin (H).
h. Left wheel is now in transport position as shown
in illustration.
i. Pull pin (J), swivel wheel clockwise as shown,
and lock with pin (J).
j. Swivel the right axle (K) to front of header.
(continued next page)
FIELD TO TRANSPORT - LH WHEEL
FIELD TO TRANSPORT - RH SIDE
K
B
FIELD TO TRANSPORT - RH SIDE
Release
Lock
C
D
A
FIELD TO TRANSPORT - RH SIDE
E
F
H
G
FIELD TO TRANSPORT - RH SIDE
J