MacDon D60 Draper Headers - Manual (Page 156)

SECTION 10. OPTIONS AND ATTACHMENTS
Form 169441 154 Revision B
10.11 DRAPER EXTENSION KIT
This kit increases the length of each deck up to
10 inches (250 mm) into the header opening
which decreases the swath width when cutting
light/thin crops.
It includes roller support extensions a draper
repair kit and necessary hardware. Installation
instructions are included.
10.12 RICE DIVIDER KIT
Available as an attachment for use with D50 and
D60 Harvest Header.
The rice dividers attach to the LH and RH
endsheets, and perform the same function in tall
and tangled rice crops as standard equipment
crop dividers.
Installation and adjustment instructions are
included with the kit.
10.13 KNIFE HEAD SHIELD
The shield attaches to the endsheet, and reduces
the knife head opening to prevent cut crop from
accumulating over the knife head, which could
damage the wobble box and the endsheet.
It is recommended that the shield(s) be installed
when harvesting severely lodged crop or any crop
condition where the heads tend to accumulate
over the knife head.
10.14 SWATH FORMING RODS
Available as an attachment for D50 and D60
Harvest Headers, and are mainly used for grass
seed cutting applications.
The rods form the windrow such that the heads
are in the center and thus protected from shatter.
Installation and adjustment instructions are
included with the kit.
10.15 HYDRAULIC DECK SHIFT
Available as an attachment for use with selected
sizes of D60 Harvest Headers.
This system allows shifting of the decks from the
Operator’s console when double-swathing.
Installation and adjustment instructions are
included with the kit.
10.16 DOUBLE WINDROW
ATTACHMENT
The Double Windrow Attachment (DWA) can be
attached to the M Series Windrower to enable
double windrowing with a hay conditioner.
The kit includes all the necessary fittings and
instructions.