MacDon D60 Draper Headers - Manual (Page 83)

SECTION 8. MAINTENANCE AND SERVICING
Form 169441 81 Revision B
8.5.2 LUBRICATION POINTS (Cont’d)
NOTE: REEL BEARING LUBE INTERVALS - 500 HOURS OR ONCE PER SEASON - WHICHEVER OCCURS
FIRST.
NOTE
U-JOINT HAS AN EXTENDED LUBRICATION CROSS AND
BEARING KIT. STOP GREASING WHEN GREASING BECOMES
DIFFICULT OR IF U-JOINT STOPS TAKING GREASE.
OVER-GREASING WILL DAMAGE U-JOINT. 6 - 8 PUMPS ARE
SUFFICIENT AT FIRST GREASE (FACTORY). DECREASE
GREASE INTERVAL AS U-JOINT WEARS AND REQUIRES
MORE THAN 6 PUMPS.
REEL CENTER BEARING (1 PLC)
DOUBLE REEL ONLY
REEL SHAFT RH BEARING (1 PLC)
REEL SHAFT LH BEARING (1 PLC)
REEL DRIVE CHAIN (1 PLC)
DOUBLE REEL SHOWN -
SINGLE REEL SIMILAR
REEL UNIVERSAL (1 PLC)
D60