MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 102)

OPERATING THE HEADER
Figure 6.42: Right End
5. Position stripper bar (A) as close as possible to auger
flighting, without contacting it.
6. Repeat above steps 4., Adjusting the Stripper Bar,
page 93 and 5., Adjusting the Stripper Bar, page 94
for opposite side.
7. Manually rotate auger to check that auger does NOT
contact stripper bars. Readjust as required.
Figure 6.43
169457
94
Rev. F