MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers User Manual
Page 62
Advertising
4. Disconnect electrical harness at connector (A).
5. If couplers and coupler lock are installed on lines,
proceed as follows. Otherwise, proceed to step
Detaching the Header (M205 Windrowers), page 55
.
Figure 5.50
6. Disconnect 1/2 in. (12.7 mm) hose (B) from windrower
coupler and remove lynch pin (A).
Figure 5.51
7. Open up coupler lock (A).
8. Remove lock from couplers (B).
Figure 5.52
169457
54
Rev. F
Advertising