MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 39)

OPERATION
5.5 Cutterbar Doors
CAUTION
Do NOT operate the machine without all the
cutterbar doors down, curtains installed and in
good condition.
There are two doors to provide access to the cutterbar area.
Rubber curtains are attached to each door, at the front
corners, and center fixed cover. Latches at the lower
corners of each curtain keep the curtains together to
minimize the risk of thrown objects.
The cutterbar curtains are very important to reduce the
potential for thrown objects. Always keep these curtains
down when operating the header.
Replace the curtains if they should become
worn or damaged. Refer to your Dealer for
replacement instructions.
Figure 5.11
5.5.1 Opening the Cutterbar Doors: North American Header
Follow these steps to open the cutterbar doors on North American header:
1. Unhook the curtain latches (A).
Figure 5.12
169457
31
Rev. F