7attaching the header, 1attaching the forming shield, Attaching the header – MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers User Manual
Page 48: Attaching the forming shield, Danger, 7 attaching the header
Advertising
5.7 Attaching the Header
5.7.1 Attaching the Forming Shield
To attach the forming shield to the windrower, follow
these steps.
1. Remove the two clevis pins (A) from forming shield
forward end.
Figure 5.22
DANGER
Stop engine and remove key from ignition before
leaving operator’s seat for any reason. A child or
even a pet could engage an idling machine.
2. Stop engine and remove key.
3. Position
the
forming
shield
(A)
under
the
windrower frame.
Figure 5.23
169457
40
Rev. F
Advertising