Hazard lights: replacing the lamp bracket – MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers User Manual
Page 166
Advertising
![background image](/manuals/570549/166/background.png)
Hazard Lights: Replacing the Lamp Bracket
Follow these steps to replace the lamp bracket:
1. Disconnect lamp wires from wiring harness at
connectors (A).
2. Remove four bolts (B) and remove lamp assembly (C)
from header.
3. Place new lamp assembly (C) on header and secure
with four bolts (B).
NOTE: Ensure amber reflector (D) faces the front
of the machine.
4. Connect lamp wires to wiring harness (A).
Figure 7.77
169457
158
Rev. F
Advertising