MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 58)

OPERATION
12. Disconnect fittings at end of hose bundle (A).
Discard caps.
Figure 5.44
13. Remove O-ring (A) from cap and install over JIC
threads on fitting at return port (B).
14. Install female coupler (C) from hose in return port (B).
15. Install male 45° fitting (D) and male coupler (E) from
hose in pressure port (F)
NOTE: Male fitting and coupler may need to
be disassembled prior to installing on
valve block.
Figure 5.45
169457
50
Rev. F