Important – MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers User Manual
Page 130
Advertising
![background image](/manuals/570549/130/background.png)
Figure 7.16: Cutterbar Filler Plug Locations
9. Locate one of the three filler plugs along the top of the
cutterbar. Refer to Figure
10. Clean around either filler plug (A) and remove one plug
with an 8 mm hex Allen L-key.
NOTE: Rotate disc to expose filler plug if
necessary.
11. Place a suitably sized container under the cutterbar
drain hole (A).
12. Remove plug (A) with an 8 mm hex Allen L-key and
allow sufficient time for lubricant to drain.
IMPORTANT
Do NOT flush the cutterbar.
13. Replace drain plug (A) and tighten.
14. Safely dispose of lubricant.
15. Add lubricant. See
Filling the Cutterbar Lubricant,
Figure 7.17
169457
122
Rev. F
Advertising