MacDon PW7 Pick-Up Header - Manual (Page 51)

SECTION 6 – MAINTENANCE/LUBRICATION
Form 169149 Revision E 45
6.6 MAINTENANCE / LUBRICATION CHART / GREASE SPEC
Read Maintenance/Lubrication Section for proper procedures. Use this chart as a quick reference only.
* Check first 10 hours of operation, and then at regular chart intervals.
GREASE SPEC: Use SAE Multi-Purpose Grease per the following:
All locations except Driveline slip joints – High Temp. Extreme Pressure (EP2) Performance With 1%
Max Molybdenum Disulphide (NLGI Grade 2). Lithium Base
Driveline slip joints – High Temp. Extreme Pressure (EP) Performance With 10% Max Molybdenum
Disulphide (NLGI Grade 2). Lithium Base
GEAR LUBE (Rake-Up): NLGI Grade 000 extreme pressure, semi-fluid lithium grease, such as
Mobilux EP 023, Petro-Can Precision XL EP000, or Chevron Dura-Lith EP000.
Service to Perform
Grease Lubric
a
te
Check Clea
n
Change
1 Drive Shaft Splines 100 100
2 Drive Shaft (Points A1, A3, A5) 50
3 Drive Shaft Clutch 50
4 Header Drive Chain & Sprocket 50
5 Six Small Gear Boxes (Rake Up Only) 100
6 Main Gear Box (Rake Up Only) 100
7 Belt Tension Idler Arm (Rake Up Only) 50
8 Tire Pressure * 100
9 Loose Fasteners 10
10 Hose Leaks 10
11 Wheel Bolts 100
12 Drive Chain Tension * 50
13 Draper Belt Tension * 50
14 Idler Rotor Bolt 50
15 Drive Rotor Bolt 50
16 Bearing Damage 100
17 Teeth Wear 100
18 Gear Box Wear 100
19 Worn Paint Spots 100
20 Cleaning of Units 100
21 Wear Inspection 100
22 Drive Shaft (Points A2, A4) 10
23 Belt Guide (SwathMaster Grass Seed) 50
24 Height Control Sensor Pivot Points 100
Frequency In Hours