MacDon Double Windrow Attachment - Manual (Page 36)

SECTION OM – OPERATOR’S MANUAL
Form # 169365
OM-12
Issue – May 2008
f. Check that transporter lights and brakes are
functioning.
g. Attach breakaway lanyard to truck hitch.
3.5.2 Unhooking from Truck
a. Park transporter on level ground.
b. Shutoff truck engine and remove key.
c. Block the transporter wheels.
d. Disconnect electrical plug from truck and store
on transporter.
e. Remove safety chains and breakaway switch
lanyard from truck and store on transporter.
f. Remove lynch pin from pintle and open pintle.
g. Remove pin securing jack in storage position
and rotate jack to working position. Secure
with pin. Place wooden block under jack if
ground is soft.
h. Lower jack to raise transporter hitch ring clear
of truck pintle.
i. Drive truck away from transporter.