MacDon Double Windrow Attachment User Manual
Page 48
Advertising
SECTION OM – OPERATOR’S MANUAL
Form # 169365
OM-24
Issue – May 2008
3.10 UNLOADING D SERIES
WINDROWER HEADER
a. Block the transporter wheels.
b. Loosen bolt on anchor chain retaining plate
and swivel plate off chain.
c. Remove chain from slot.
d. Remove lynch pins from both cutterbar tie-
downs and push levers down to disengage
hooks from cutterbar.
e. Store lynch pin in hole provided on lever.
f. Remove pins from header boots.
g. Rotate latch on centerlink to down position.
h. Approach header with windrower tractor and
line up lift legs with header boots.
i. Continue forward so that tractor legs engage
header boots.
(continued next page)
Advertising
This manual is related to the following products: