Caution – MacDon Double Windrow Attachment User Manual

Page 61

Advertising
background image

SECTION OM – OPERATOR’S MANUAL

Form # 169365

OM-37

Issue – May 2008

4.5 MAINTENANCE

SCHEDULE

The following maintenance schedule is a listing of
periodic maintenance procedures, organized by
service intervals. Regular maintenance is the best
insurance against early wear and untimely
breakdowns. Following this schedule will increase
machine life. For detailed instructions, refer to the
specific headings in this manual. Use the lubricant
specified in Paragraph 4.2.1, Lubricants.

Service Intervals: The recommended service
intervals are in hours of operation. Where a
service interval is given in more than one time

frame, e.g. "3 Months or 3000 Miles", service the
machine at whichever interval is reached first.

IMPORTANT

Recommended intervals are for average
conditions. Service the machine more
often if operated under adverse
conditions (severe dust, extra heavy
loads, etc.).

CAUTION

Carefully follow safety messages given
under Paragraph 4.1 Recommended
Safety Procedures.

INTERVAL SERVICE

FIRST USE

Refer To Paragraph 3.3 FIRST USE.

EVERY USE

1. Check brakes operational.
2. Check breakaway system battery and switch operation.

WEEKLY

Check tire inflation pressure – 65 psi (448 kPa).

END OF

SEASON

Refer To Paragraph 3.14 STORAGE.

3 MONTHS OR

3000 MILES

(4830 km)

1. Adjust brakes to proper operating clearance.
2. Check wheel nuts and adjust as required.
3. Check tires for wear, cuts, bulging, etc.

6 MONTHS OR

6000 MILES

(9660 km)

1. Check brake magnets for wear and current draw.
2. Check brake controller for correct amperage and modulation.
3. Inspect suspension for deformation, wear, and loose fasteners.
4. Visually inspect wheels for distortion, cracks, or dents.

12 MONTHS OR

12000 MILES

(19320 km)

1. Inspect brake linings for wear or contamination.
2. Inspect wiring for bare spots, fraying, etc.
3. Inspect wheel drum for abnormal wear and scoring.
4. Inspect seals for leakage. Replace if removed.
5. Visually check header support welds for cracks.


* IT IS RECOMMENDED THAT ANNUAL MAINTENANCE BE DONE PRIOR TO START OF OPERATING

SEASON.

Advertising
This manual is related to the following products: