MacDon Double Windrow Attachment User Manual
Page 47
Advertising
SECTION OM – OPERATOR’S MANUAL
Form # 169365
OM-23
Issue – May 2008
3.9.5 Attach Header Anchor Chain
a. If first use, undo bolt to remove retaining plate
at end of chain.
b. Install retaining plate in keyhole slot in header
RH leg with bolt removed in previous step. Do
not fully tighten as plate must be able to
swivel.
c. Swivel retaining plate and install chain in
keyhole slot. Tighten bolt on plate to secure
chain in slot.
Advertising
This manual is related to the following products: