MacDon 802 Bi-Directional Adapter - Manual (Page 14)

13
INITIAL SET-UP
PREPARING THE 721/722 HAY CONDITIONER
(continued)
5. Move rear forming shield support brackets (D)
to second bolt from each end.
6. Remove crop deflector (C) from under adapter
to allow conditioner forming shield installation.
See page 10 for removal instructions.
Remove L-bracket from top of rubber strap
and attach rubber strap (E) to adapter frame
with 3/8 flange nut and washer supplied with
hay conditioner shield. Attach strap to bracket
(D) at longest adjustment to ensure adequate
clearance to pump at first hook-up. Readjust
to height desired after hook-up.
ATTACH REAR SUPPORTS
D
ATTACH RUBBER STRAPS
E
C
REMOVE CROP DEFLECTOR