MacDon 802 Bi-Directional Adapter - Manual (Page 28)

27
ATTACHING & DETACHING
DETACHING HEADER FROM TRACTOR AND ADAPTER
(continued)
9. Remove pins (E) from header legs. (When
detaching procedure is complete, replace pins
in header legs for storage.
10. Swing adapter stands back to the storage
position (F).
11. Lower header. Stop engine and remove key.
12. Disconnect center link at header and raise to
storage position (G).
13. 741/742 Hay Conditioner
a. Detach chain at right side of conditioner from
adapter frame at (K).
b. Detach conditioner float spring from adapter by
removing bolt (L) or detaching chain at top of
conditioner.
14. Slowly back away from header.
ADAPTER STANDS – STORAGE POSITION
F
DISCONNECT CENTER LINK
G
DETACH CHAIN & FLOAT SPRING
741/742 HAY CONDITIONER
K
L
REMOVE PINS FROM HEADER LEGS
942 HEADER SHOWN
E