Attaching & detaching – MacDon 802 Bi-Directional Adapter User Manual
Page 20
Advertising
19
ATTACHING & DETACHING
ATTACHING ADAPTER TO TRACTOR (continued)
12. Remove pin from hole (A) and place in storage
position (B) on top of frame leg. Place adapter
stands in storage position (G). Retract the
telescoping foot into the stand to minimize
storage length.
NOTE: For adapters with hay conditioner top
forming shield attached, stands must be
rotated 180
° (inside edge to outside) as
shown.
PLACE STANDS IN STORAGE
G
A
Advertising