SATEC C191HM - Manual (Page 31)

Chapter 4 Setup Menus 22
4.2 Communications Port Setup Menu
This menu allows you to access the communications port options that the
C191HM uses to communicate with a master computer. Table 4-2 lists the
communications options, their code names and applicable choices.
Activate the middle window to scroll through the list of available options, and
then activate the lower window to set the option value.
To select and view a setup option:
Press to activate the middle window.
Use the up/down arrow keys to scroll to the desired option. The option
setting will appear in the lower window.
To change the selected option:
Press to activate the lower window.
Press the up/down arrow keys to scroll to the desired value.
Press to store the selected value or press to quit the setup
menu.
Table 4-2 Communications Options ( ∗ default setting)
Code Parameter Options Description
Prot Communications
protocol ASCII ∗
rtu
ASCII protocol
Modbus RTU protocol
Addr Address 0 ∗-99 ASCII
1 ∗-247 Modbus
Powermeter address
bAud Baud rate 110 110 baud
300 300 baud
600 600 baud
1200 1200 baud
2400 2400 baud
4800 4800 baud
9600 ∗ 9600 baud
19.20 19,200 baud
dAtA Data format 7E 7 bits, even parity
8n ∗ 8 bits, no parity
8E 8 bits, even parity
CPtb ASCII compatibility
mode diS ∗, En Disables/enables ASCII
compatibility mode. For more
information, see ASCII
Communications Protocol
Reference Guide
SELECT
Port
ASCII
Prot
SELECT
ENTER ESC
SELECT CHG ENTER Port ENTER