SATEC C191HM - Manual (Page 42)

Chapter 4 Setup Menus 33
4.8 Display Setup Menu
This menu allows you to view and change display properties. Table 4-9 lists
available options with their code names and applicable ranges.
Table 4-9 Display Options ( ∗ default setting)
Display Code Parameter Options Description
UPdt
Display update
time 0.1 - 10.0 s
(0.5)* Defines interval between
display updates
ScrL Auto scroll nonE*
2-15 s Disables/enables auto scroll
on common measurements
display (main screen) and
defines scroll interval
rEtn
Auto return to
the main screen diS*, En Disables/enables auto return
to the main screen after 30
seconds of uninterrupted use
bAr Nominal load
current for LED
bar graph 0-6,500A
(0*)
Defines the nominal load
(100%) level for the bar
graph display
(0 = CT primary current)
Ph.P
Phase powers
display mode diS*, En Disables/enables display of
phase powers in common
measurements (main
screen)
Fund
Fundamental
values display
mode diS*, En Disables/enables display of
fundamental values in
common measurements
(main screen)
diSP
5
ScrL
diSP
0.5
UPdt
diSP
diS
Ph.P
diSP
diS
rEtn
diSP
5000
bAr
diSP
diS
Fund
SELECT CHG diSP ENTER ENTER