SPYPOINT WiFi - Manual (Page 10)

18 19
English
English
Power:
(Batteries/
Electricity)
Allows the user to select the type of power
supply.
Choose «Electricity» if the camera is powered
by a main electric supply. (using a 12-volt DC
adapter AD-12V, sold separately). Main electric
power supply is recommended when use for
security purposes. It provides an instant trigger
time when a movement is detected. The lithium
battery pack and the AA batteries can remain
safely inside the camera and it is ideal in case
of a blackout. A 12-volt DC adapter that can
provide a minimum of 800 mA is required
(See OPTIONS for accessories).
When the option «Electricity» is enabled:
• The option «Delay» is reduced and locked to 2
seconds to speed up the photo shooting.
• The «Multi-shot» speed is improved with a 2
second delay between each take.
• The option «Time Lapse» is disabled.
•
The option «Synchronize» is locked
on «Permanent» (for «Home Security»
and «mySPYPOINT
TM » mode) to allow
transmission of pictures after each set of
pictures recorded.
• The option «Synchronize at» is ignored.
• If the option «Multi-shot» is enabled, the
Wi-Fi transmission is performed once the
series of photos is recorded.
• The camera is synchronized with the server
every 10 mins. and uses an average of 1.4Mb
of data per day excluding the weight of
pictures transmitted during this period.
Continuous:
(Yes/No)
Allows the camera to operate in continuous
mode. When there is no more space available on
the memory card to save photos or videos, the
camera continues to save by erasing the oldest
files and by replacing them with newest ones.
Infrared:
(On/One LED/
Off)
Selects the desired infrared illumination mode.
ON: All LEDs illuminate when taking photos or
videos at night.
One LED: Only a single LED illuminates (see
figure). This option can be useful when using an
IR-Booster.
OFF: LEDs are deactivated so your night
photos or videos are pitch black.
Remote :
(REMOS
TM )
(On/Off)
Allows use of the remote control. (see REMOTE
CONTROL section for details)
IR-Booster
(REMOS
TM )
(On/Off)
Allows the camera to trigger, up to a distance
of 50 ft, one or more remote IR-BOOSTER
infrared lighting devices without the use of an
additional transmitter.
MS-1:
(REMOS TM )
(On/Off)
Allows the camera to be triggered wirelessly by
one or more MS-1 devices. (see OPTIONS for
details)
Info: Displays system information:
• Model name
• Serial number
• Software version
• MAC address
One LED