Settings menu – SPYPOINT WiFi User Manual
Page 7

12
13
English
English
VIEW
Allows the user to view photos or videos on the built-in
3.5" screen of the camera or on a TV set.
With 3.5" built-in screen:
When VIEW mode is selected, the latest image or video recorded
automatically appears on the screen. Press the
◄
or
►
button to
view the previous or next file. Press OK to see the different options
available. Press BACK to return to the photo or video. See different
options available:
Play:
Plays or pauses the video on the screen.
(This option is available only for videos)
Delete:
Deletes the photo or video displayed on the screen.
Delete all:
Deletes all photos and videos that were not
protected.
Format:
Deletes the entire contents of the memory card,
including protected files.
Note: Press the ▲ to enlarge the image on the screen
or ▼ to return to the original size. When the image
is enlarged, use the navigation buttons to video the
part of the image wanted. Press BACK to return to
original size.
With a TV set:
Allows the user to view photos and videos directly on a TV set. Turn
the camera on and plug the yellow end of the composite audio-video
cable supplied with the camera to VIDEO IN input of the TV set and
the other end into the TV OUT output of the camera. The camera
screen turns black and the last recorded picture or video will appear
on the TV screen. To change the photos or videos, use the
◄
and
►
button. The options are the same as when viewing on the built-in
screen of the camera (see above).
SETTINGS MENU
Allows the user to set the advanced settings of the camera.
To configure the system in another language, press the
▼
button
until the option «Language» is highlighted. Press OK and modify
the selection with
▲
or
▼
button. Confirm the choice by pressing
OK. The system will than change all the menus in the selected
language.
Navigating the menu:
• ▲
and
▼
button to change settings
• ◄
and
►
button to change pages
When selected, some options affect the behaviour of other
options from the list of the settings menu. In this case, the
selected option is displayed in yellow and options affected are
shown in gray.
WiFi conf.:
(Hunting/
Home Security/
mySPYPOINT
TM
)
Allows to choose the configuration mode.
Note: When
«Hunting» mode is selected, the
options «Synchronize» and «Synchronize at» are
disabled. The option «Remote » displays «N/A»,
but will always be activated.
(See CONFIGURATION MODES section for
more details on the different modes.)
Test WiFi:
Allows to test the current configuration.
Date:
Set the date as Year/Month/Day
Time:
Set the time as Hour/Minute/Second
Note: The seconds are not printed on the pictures
when «Stamp» option is activated.
Time format:
(12h/24h)
Allows the user to choose between a 12 or 24
hour time period display on the photos.
(eg. 6:00 pm or 18:00)