SPYPOINT WiFi - Manual (Page 4)

6 7
English
English
Configuration of the
camera: • For « Hunting » mode, the camera
can be configured remotely on the
website www.nameofthecamera.com
via the activation of Wifi camera
network with the remote control.
• For
« Home Security » mode, can
only be configured from the camera.
• For
« mySPYPOINT TM » mode,
the camera can be configured
from
mySPYPOINT TM website
(subscription required).
Softwares: • The software «SPYPOINT ® Security
manager» and «SPYPOINT ® Hunting
photos downloader» are available on
www.spypoint.com
• These softwares are compatible with
Windows only.
Technology Remos TM : This camera is compatible with
REMOS
TM Technology (see
REMOS TM TECHNOLOGY
section).
Recommendations:
Operating temperature (-20 °C to + 50 °C)
(-4 °F to +122 °F)
Storage temperature (-30 °C to + 75 °C)
(-22 °F to +167 °F)
CONTENTS
• SPYPOINT ® WiFi camera
• RC-1 Remote control
• Wi-Fi antenna 2.4 GHz
• Installation strap
• USB and audio-video cables
• User Manual
POWER SUPPLY
The battery level is shown in the upper left corner of the screen
when the camera is in TEST mode. When a single line remains, the
camera will continue to take pictures but we strongly recommend
changing the batteries before they are empty (see figure below).
AA BATTERIES
This camera requires the use of 8 AA batteries (1.5V). The use of
alkaline or lithium batteries is strongly recommended. Also note
that the voltage of rechargeable AA batteries (1.2V) is insufficient
to power this camera. During the installation of the AA batteries,
slide the switch inside the battery case to ALK (i.e. alkaline). Insert
the batteries in the camera as indicated. Exact polarity must be
followed. We also recommend the use of new batteries to ensure
maximum performance of your camera.
LITHIUM BATTERY PACK
The camera can be powered by a rechargeable lithium battery
pack LIT-09/LIT-C-8 (sold separately, see OPTIONS). This type
of battery is less affected by cold temperatures and lasts up to 3
times longer than alkaline batteries. During the installation of the
lithium batterie pack, slide the switch inside the battery case to LIT-
09. Insert the batterie in the camera as indicated (see figure below).
RESET
ALK
LIT-09