SPYPOINT WiFi - Manual (Page 9)

16 17
English
English
Stamp:
(Yes/No)
Select or cancel printing the date, time,
temperature and moon phases on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Temp.
format:
(°F/°C)
Changes the temperature display.
Language:
(English/Français/
Deutsch)
Sets the display language of the camera’s menus.
Synchronize:
(Permanent/1/2/6/
12 times a day)
Sets the daily number of synchronizations
For «Home Security» mode, this option
changes the frequency at which the camera
communicates with the existing Wi-Fi network
to send photos in the folder selected during the
configuration of the system (with «SPYPOINT
®
Security manager» software).
For «mySPYPOINT TM » mode, this option
changes the frequency at which the camera
communicates with the
mySPYPOINT TM server
in order to update its status or to send photos on
the user’s account.
Note: When this option is set to «Permanent», it
requires more energy.
Synchronize
at: For «Home Security» mode, defines at what
time of day the camera communicates with the
existing Wi-Fi network to send photos in the
folder selected during the configuration of the
system (with «SPYPOINT
® Security manager»
software).
Note: The computer must be running and the
software enabled for synchronization work.
For «mySPYPOINT TM » mode, defines at what
time of day the camera communicates with the
mySPYPOINT TM server in order to update its
status or to send photos on the user’s account.
(Over a period of 24 hours)
e.g.1: The option «Synchronize at» is set to
04:00 and the option «Synchronize» is set to 6/
day. The camera performs 6 synchronizations
per day and begins its first transfer at 4h, then at
8h, 12h, 16h, 20h and 24h.
e.g.2: The option «Synchronize at» is set to
01:00 and the option «Synchronize» is set to 2/
day. The camera performs 2 synchronizations
per day and begins its first transfer at 1h, then
at 13h.
Sensitivity:
(Low/Medium/
High)
Sets the detection sensitivity of the camera.
Note: The system detects only heat sources in
motion. So it is important during installation to
avoid as much as possible, objects obstructing
the camera . This prevents the camera from
being triggered because of the sun reflecting on
these objects. (e.g. a tree branch)