SPYPOINT WiFi - Manual (Page 5)

8 9
English
English
EXTERNAL
This camera can also be powered from an external 12-volt DC input
such as a 12-volt battery (KIT-12V/BATT-12V, sold separately) or a
12-volt adapter (AD-12V, sold separately). During the installation of
a 12-volt connection, slide the switch inside the battery case to ALK
(the AA batteries can remain safely inside the camera). If combined
with a lithium battery pack, slide the switch to LIT-09. For the
accessories available, refer to the section OPTIONS.
SOLAR PANEL
This model offers the possibility of a connection to a solar panel
SP-12V (sold separately, see OPTIONS) to maintain the charge
of the lithium battery pack LIT-09/LIT-C-8 (sold separately, see
OPTIONS). During the installation of the rechargeable lithium
battery pack, slide the switch inside the battery case to LIT-09 to
activate the charging system of the solar panel.
Power source Switch position
• 8 AA
• 12V
• 12V + 8 AA
ALK
• LIT-09
• 12V + LIT-09
• Solar Panel + LIT-09
LIT-09
MEMORY CARD
Using a memory card (sold separately, see OPTIONS) is required
to operate the camera. When the PHOTO or VIDEO mode is
selected, the screen displays «No memory card» if no memory card
is present. The camera is compatible with SD/SDHC memory card,
up to 32 GB capacity. Before inserting or removing a memory card,
the camera must be turned off. Failing to do so may cause loss of
pictures or damage the pictures already recorded on the memory
card. When the SD card is full, the viewing screen indicates
«Memory card full» when the PHOTO or VIDEO mode is selected.
The used space on the memory card is displayed as percentage in
the upper right corner of the screen when the camera is in TEST
mode. The following data shows the approximate quantity of photos
or video length that can be taken by the camera depending on the
memory card capacity.
2.0 GB 4.0 GB 8.0 GB 32 GB
Photo
8 MP 1190 2380 4760 19040
Video
640 x 480 65 min 2h10 4h10 16h40
«BUSY» LED
The «BUSY» light, located next to the screen, lights up when the
camera is recording and flashes during the activation of a Wi-Fi
network.
MAIN MENU
Use the ▲ and ▼ button to navigate the interface or to modify a
selection, the OK button to select and the BACK button to return to
the previous menu.
The following information appears on the main menu screen:
1.Serial number
2.Software version
1. 2.