Rockwell Automation 22B PowerFlex 40 Configured AC Drives - Manual (Page 20)

20 Rockwell Automation Publication 23B-IN001K-EN-P - September 2013
Chapter 1 PowerFlex 40 Standard Configured Drive Standard Features and Options
Local Speed Potentiometer (Code S18)
This option provides a factory installed 800F door mounted one turn
potentiometer for speed control. The device provides the speed source when no
digital inputs are active.
When this option is provided, it becomes the speed source for the Hand mode of
the Hand/Off/Auto selector switch (Option S1) and the Manual mode of the
Auto/Manual selector switch (Option S4).
Component Specifications
This option is not compatible with Codes R3-R5.
Local Control Off/Run Forward and Local/Remote Selector Switches
(Code S20)
This option provides two factory installed 800F door mounted selector switches.
The Local/Remote selector switch determines the source of the start, stop, speed
and direction commands. In Local mode, the factory default setting for
parameter P038 [Speed Reference] = 4 “Preset Freq.”
In Remote mode, the factory default setting for parameter A051 [Digital In1 Sel]
= 6 “Comm Port.” The Off/Run Forward selector switch allows the drive to be
started and stopped when in Local Control.
Component Specifications
This option is not compatible with Codes R3, R5, S1, S4, S7, S8, S21 or S22.
Bulletin 800F Devices IEC style, Internationally rated
Meet IP65/IP66 and NEMA/UL Type 4/4X/13
UL Listed, CSA Certified
Screw terminals, 0.3…3.5 mm
2 (22…12 AWG) maximum
Speed Potentiometer 1-turn, 10k, 2.25W, 500V
Legend Plate 30 x 50 mm, Black with white lettering
Wiring 0.8 mm 2 (18 AWG), Blue
Schematic Figure 13 on page 40
Bulletin 800F Devices IEC style, Internationally rated
Meet IP65/IP66 and NEMA/UL Type 4/4X/13
UL Listed, CSA Certified
10 amp contacts
Screw terminals, 0.3…3.5 mm
2 (22…12 AWG) maximum
Local Control Off/Run Forward
Selector Switch 2 position, Maintained, 1 N.O. contact
Local/Remote
Selector Switch 2 position, Maintained, 1 N.O. contact
Legend Plate 30 x 50 mm, Black with white lettering
Wiring 0.8 mm 2 (18 AWG), Blue
Schematic Figure 12 on page 39