Rockwell Automation 22B PowerFlex 40 Configured AC Drives - Manual (Page 7)

Rockwell Automation Publication 23B-IN001K-EN-P - September 2013 7
Preface
General Precautions
Compliance Certification Certifications are applicable to approved program defined options.
U.S./Canada UL: UL508C
CUL: CAN/CSA-C22.2 No. 14
Please refer to the PowerFlex 40 Adjustable Frequency AC Drive User Manual,
publication
22B-UM001 , for additional information.
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts
and assemblies. Static control precautions are required when installing, testing,
servicing or repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with static control
procedures, reference A-B publication 8000-4.5.2, “Guarding Against
Electrostatic Damage” or any other applicable ESD protection handbook.
ATTENTION: An incorrectly applied or installed drive can result in component
damage or a reduction in product life. Wiring or application errors, such as,
under sizing the motor, incorrect or inadequate AC supply, or excessive ambient
temperatures may result in malfunction of the system.
ATTENTION: Only qualified personnel familiar with adjustable frequency AC
drives and associated machinery should plan or implement the installation,
start-up and subsequent maintenance of the system. Failure to comply may
result in personal injury and/or equipment damage.
ATTENTION: To avoid an electric shock hazard, verify that the voltage on the
bus capacitors has discharged before performing any work on the drive.
Measure the voltage at the drive (Refer to the PowerFlex 40 User Manual for test
point locations). The voltage must be zero.