Rockwell Automation 56RF High Frequency 13.56 MHz RFID EtherNet/IP Interface Block - Manual (Page 10)

10 High Frequency 13.56 MHz RFID EtherNet/IP Interface Block
Drawing Number 10000181820 Ver. 01 - November 2012
EtherNet/IP Connectors
IMPORTANT
Use the 1585D-M4DC-H: Polyamide small body unshielded or the 1585D-M4DC-SH:
Zinc die-cast large body shielded mating connectors for the D-Code M12 female
network connector.
IMPORTANT
Use two twisted pair CAT5E UTP or STP cables.
ATTENTION
Make sure all connectors and caps are securely tightened to properly seal the
connections against leaks and maintain IP enclosure type requirements.
4
2
3 1
5
D-Code M12 Network Female Connector
(View into connector)
Pin 1 M12_Tx+
Pin 2 M12_Rx+
Pin 3 M12_Tx-
Pin 4 M12_Rx-
Pin 5 Connector shell shield FE
44808
D-Code
M12 Pin
Wire Color Signal 8-way Modular
RJ45 Pin
1 White-Orange TX+ 1
2 White-Green RX+ 3
3 Orange TX- 2
4 Green RX- 6