Rockwell Automation 56RF High Frequency 13.56 MHz RFID EtherNet/IP Interface Block - Manual (Page 8)

8 High Frequency 13.56 MHz RFID EtherNet/IP Interface Block
Drawing Number 10000181820 Ver. 01 - November 2012
Mount the Module in High Vibration Areas
If you mount the module in an area that is subject to shock or vibration, we
recommend you use a flat and a lock washer to mount the module. Mount the
flat and the lock washer as shown in the mounting illustration below. Tighten
the mounting screws to 1.13 N•m (10 lb•in).
High Vibration Area Mounting
Connect the I/O, Network and Auxiliary Cables to the EtherNet/IP Interface Block
The EtherNet/IP Interface Block has 5-pin micro-style connectors for I/O and
RFID interface. We provide caps to cover the unused connectors on your
module. Connect the quick-disconnect cord sets you selected for your module to
the appropriate ports.
Lock
Washer
Flat
Washer