Rockwell Automation 56RF High Frequency 13.56 MHz RFID EtherNet/IP Interface Block - Manual (Page 11)

High Frequency 13.56 MHz RFID EtherNet/IP Interface Block 11
Drawing Number 10000181820 Ver. 01 - November 2012
Configure Operations
Refer to On-Machine Connectivity Catalog for Rockwell Automation cable and
cord set offerings or use the configuration tools available at
www.ab.com/e-tools/ .
Auxiliary Power Cable
Attach a micro-style 4-pin female to the micro-style 4-pin male receptacle as
shown below. The female side is used to daisy chain the power to another device.
The power connection is limited to 4 A. When the daisy chain approach is used,
Functional Earth (1)
Ethernet/IP D-Code
M12 Connector
Ethernet/IP D-Code
M12 Connector
Status LEDs
Node Address
Switches
M12 RFID
Transceiver Interface
M12 RFID
Transceiver Interface
(IPD22, IPD22A)
M12 Input
Connector
M12 Output Connector (IPS12, IPD22)
M12 Input Connector (IPD22A)
Auxiliary Power
(M12 4-Pin Male Input)
Auxiliary Power
(M12 4-Pin Female
Pass Through)