Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module - Manual (Page 11)

Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013 11
Chapter
1
Getting Started
The 20-750-PNET2P option module is intended for installation into a
PowerFlex 750-Series drive and is used for network communication.
Components
Topic Page
Components 11
Features 12
Understanding Parameter Types 13
Compatible Products 13
Required Equipment 13
Safety Precautions 16
Quick Start 17
➊
➋
➌ ➍
Item Part Description
➊ Status
Indicators Four status indicators
that indicate the status
of the option module and
network communication.
See
Chapter 7 ,
Troubleshooting .
➋ IP Address
Selection
Jumper Sets the source used for
the network address.
See
Setting the IP
Address Selection
Jumper on page 20
.
➌ Port 1 Profinet
Connector RJ45 connection for a
Profinet network cable.
➍ Port 2 Profinet
Connector RJ45 connection for a
Profinet network cable.