Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module - Manual (Page 45)

Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013 45
Configuring the Profinet Master Chapter 4
This action opens a list of device configuration modules. The example
screen below shows the possible input/output configuration modules for
the option module.
The Datalinks (1-16) allow the assignment of configured drive parameters
to be included in the Profinet I/O data frames that are transferred between
the controller and the PowerFlex 750-Series drive.
5. Drag the input and output parameters to the module subscriber list below
the Hardware Configuration window.
This view displays the module number, configuration data, and starting
input and output addresses that will be assigned in the controller.
For this example, words of Datalink 01 are configured. These input and
output 32-bit values are assigned to addresses within the IE General
internal database. For each new device added to the Profinet network, the
configuration tool automatically converts the input/output byte addresses
to input and output image addresses for the tag database in the controller.