Chapter 4, Configuring the profinet master, Example network – Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module User Manual
Page 41: For mor
Rockwell Automation Publication 750COM-UM007A-EN-P - March 2013
41
Chapter
4
Configuring the Profinet Master
Profinet Masters are available from several manufacturers. This chapter provides
instructions on how to use the Profinet Master configuration tool to:
• Configure the Profinet Master
• Install the 20-750-PNET2P GSDML file
• Configure the 20-750-PNET2P option module as a PowerFlex 750
Profinet slave
Example Network
In this example, we will configure one PowerFlex 750-Series drive with a 20-750-
PNET2P option module, to be assigned as Station 1 on a Profinet network. This
configuration is used as an example system throughout the rest of this manual.
Most drives will have identical configurations apart from its IP address and
option module mapping. A drive is identified by the IP address on a Profinet
network. This chapter describes the steps to configure a simple network as shown
below.
Topic
Page
Configure the Profinet Controller
Profinet Master
Station 0
PowerFlex 750-Series Drive
Station 1