Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module - Manual (Page 81)

Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013 81
Option Module Parameters Appendix B
06
07
08
09 [IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
Sets the IP address bytes for the option module’s
network address.
Important: To set the IP address using these
parameters, the IP Address Selection Jumper
(
Figure 1 on page 20 ) must be on Pins 2 and 3.
Default: 192
Default: 168
Default: 0
Default: 1
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
10
11
12
13 [Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
Sets the subnet mask bytes for the option module’s
network address.
Important: To set the subnet mask using these
parameters, the IP Address Selection Jumper
(
Figure 1 on page 20 ) must be on Pins 2 and 3.
Default: 255
Default: 255
Default: 255
Default: 0
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
14
15
16
17 [Gateway Cfg 1]
[Gateway Cfg 2]
[Gateway Cfg 3]
[Gateway Cfg 4]
Sets the gateway address bytes for the option
module’s network address.
Important: To set the gateway address using
these parameters, the IP Address Selection
Jumper (
Figure 1 on page 20 ) must be on Pins 2
and 3.
Default: 192
Default: 168
Default: 0
Default: 1
Minimum: 0
Maximum: 255
Type: Read/Write
Reset Required: Yes
Parameter
No. Name and Description Details
255.255.255.255
[IP Addr Cfg 1]
[IP Addr Cfg 2]
[IP Addr Cfg 3]
[IP Addr Cfg 4]
255.255.255.255
[Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
255.255.255.255
[Gateway Cfg 1]
[Gateway Cfg 2]
[Gateway Cfg 3]
[Gateway Cfg 4]