Downloading the project to the profinetcommander – Rockwell Automation 20-750-PNET2P Profinet Dual Port Option Module User Manual
Page 46
46
Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013
Chapter 4 Configuring the Profinet Master
6.
Likewise add as many modules as required.
All the modules from Datalink 01 to Datalink16 can be added.
7.
From the command Station menu, choose Save and compile.
The hardware configuration is compiled and saved.
8.
From the command PLC menu, choose Download.
9.
Select OK when prompted.
The hardware configuration will be downloaded to the IO controller.
Downloading the Project to the ProfinetCommander
1.
From the command Station menu, choose Export.
2.
On the Export window, click Browse to locate the path for the target file.
3.
Select the path for the target file and click Open.
The Export window will appear again.
4.
Click Save to save the file with a ‘.cfg’ extension.
This configuration is saved in the CFG file and can be used by the
ProfinetCommander.