Setting parameters to default values – Rockwell Automation 842D-60131331BXA DeviceNet Encoder User Manual User Manual
Page 26
Advertising
![background image](/manuals/577524/26/background.png)
4-8
Configuring the Encoder Using RSNetWorx for DeviceNet
Setting Parameters to
Default Values
In order to reset the parameters to the factory default values, the
service Reset (05
hex
) of the encoder object is used. This is done in the
Class Instance Editor. Select the service Reset (05
hex
) of the object
2F
hex
(encoder object), Instance 1, with the ‘Send the attribute ID’
box unchecked. Finish by clicking on the Execute button.
Advertising
This manual is related to the following products: